dmesg - 2012-01-25 21:37
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-39squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 9 20:49:59 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdd1000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000042f000000 aka 17136M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfda0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfda0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfda0000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-000000042f000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 042f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 42f000000 @ a000-c000
[ 0.000000] RAMDISK: 3771c000 - 37fefdf8
[ 0.000000] ACPI: RSDP 00000000000f6c60 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfdd1000 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfdd1100 07633 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfda0000 00040
[ 0.000000] ACPI: MSDM 00000000cfdd8800 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000cfdd8880 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdd88c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdd8940 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cfdd89b0 00182 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfdd8740 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdd8b40 066B9 (v01 MATS RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000cfddf270 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000042f000000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000042f000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000098dff] pages 86
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 042f000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001686594] TEXT DATA BSS ==> [0001000000 - 0001686594]
[ 0.000000] #3 [003771c000 - 0037fefdf8] RAMDISK ==> [003771c000 - 0037fefdf8]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001687000 - 00016870fe] BRK ==> [0001687000 - 00016870fe]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f4d40] f4d40
[ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880001800000-ffff88000f9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0042f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfda0
[ 0.000000] 0: 0x00100000 -> 0x0042f000
[ 0.000000] On node 0 totalpages: 4189503
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3841 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 832984 pages, LIFO batch:31
[ 0.000000] Normal zone: 45640 pages used for memmap
[ 0.000000] Normal zone: 3292600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfda0000 - 00000000cfdd1000
[ 0.000000] PM: Registered nosave memory: 00000000cfdd1000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fc00000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129425
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000fdde000 - ffff880013dde000
[ 0.000000] software IO TLB at phys 0xfdde000 - 0x13dde000
[ 0.000000] Memory: 16443508k/17547264k available (3082k kernel code, 789252k absent, 314504k reserved, 1873k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3917.644 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 8638.87 BogoMIPS (lpj=17277744)
[ 0.008015] Security Framework initialized
[ 0.008018] SELinux: Disabled at boot.
[ 0.012246] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.016000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017574] Mount-cache hash table entries: 256
[ 0.017663] Initializing cgroup subsys ns
[ 0.017665] Initializing cgroup subsys cpuacct
[ 0.017668] Initializing cgroup subsys devices
[ 0.017669] Initializing cgroup subsys freezer
[ 0.017671] Initializing cgroup subsys net_cls
[ 0.017685] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.017686] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.017688] CPU 0/0x0 -> Node 0
[ 0.017690] CPU: Physical Processor ID: 0
[ 0.017691] CPU: Processor Core ID: 0
[ 0.017692] mce: CPU supports 7 MCE banks
[ 0.017702] Performance Events: AMD PMU driver.
[ 0.017705] ... version: 0
[ 0.017706] ... bit width: 48
[ 0.017707] ... generic registers: 4
[ 0.017708] ... value mask: 0000ffffffffffff
[ 0.017709] ... max period: 00007fffffffffff
[ 0.017710] ... fixed-purpose events: 0
[ 0.017711] ... event mask: 000000000000000f
[ 0.018301] ACPI: Core revision 20090903
[ 0.028058] Setting APIC routing to flat
[ 0.028332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068832] CPU0: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.012000] CPU 1/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.156118] CPU1: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.156124] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160068] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.012000] Initializing CPU#2
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.012000] CPU 2/0x2 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 5
[ 0.248068] CPU2: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.248073] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.252046] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.012000] Initializing CPU#3
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.012000] CPU 3/0x3 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 2
[ 0.340031] CPU3: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.340036] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.344044] Booting processor 4 APIC 0x4 ip 0x6000
[ 0.012000] Initializing CPU#4
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.012000] CPU 4/0x4 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 3
[ 0.432069] CPU4: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.432074] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.436050] Booting processor 5 APIC 0x5 ip 0x6000
[ 0.012000] Initializing CPU#5
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.012000] CPU 5/0x5 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 4
[ 0.524109] CPU5: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.524114] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.528044] Booting processor 6 APIC 0x6 ip 0x6000
[ 0.012000] Initializing CPU#6
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.012000] CPU 6/0x6 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 7
[ 0.616032] CPU6: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.616037] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.620056] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.012000] Initializing CPU#7
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 2048K (64 bytes/line)
[ 0.012000] CPU 7/0x7 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 6
[ 0.708076] CPU7: AMD FX(tm)-8150 Eight-Core Processor stepping 02
[ 0.708080] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.712015] Brought up 8 CPUs
[ 0.712018] Total of 8 processors activated (69108.16 BogoMIPS).
[ 0.716045] CPU0 attaching sched-domain:
[ 0.716048] domain 0: span 0-7 level MC
[ 0.716050] groups: group ffff88000fc0fbf0 cpus 0 group ffff88000fc4fbf0 cpus 1 group ffff88000fc8fbf0 cpus 2 group ffff88000fccfbf0 cpus 3 group ffff88000fd0fbf0 cpus 4 group ffff88000fd4fbf0 cpus 5 group ffff88000fd8fbf0 cpus 6 group ffff88000fdcfbf0 cpus 7
[ 0.716060] CPU1 attaching sched-domain:
[ 0.716062] domain 0: span 0-7 level MC
[ 0.716063] groups: group ffff88000fc4fbf0 cpus 1 group ffff88000fc8fbf0 cpus 2 group ffff88000fccfbf0 cpus 3 group ffff88000fd0fbf0 cpus 4 group ffff88000fd4fbf0 cpus 5 group ffff88000fd8fbf0 cpus 6 group ffff88000fdcfbf0 cpus 7 group ffff88000fc0fbf0 cpus 0
[ 0.716071] CPU2 attaching sched-domain:
[ 0.716073] domain 0: span 0-7 level MC
[ 0.716074] groups: group ffff88000fc8fbf0 cpus 2 group ffff88000fccfbf0 cpus 3 group ffff88000fd0fbf0 cpus 4 group ffff88000fd4fbf0 cpus 5 group ffff88000fd8fbf0 cpus 6 group ffff88000fdcfbf0 cpus 7 group ffff88000fc0fbf0 cpus 0 group ffff88000fc4fbf0 cpus 1
[ 0.716082] CPU3 attaching sched-domain:
[ 0.716083] domain 0: span 0-7 level MC
[ 0.716084] groups: group ffff88000fccfbf0 cpus 3 group ffff88000fd0fbf0 cpus 4 group ffff88000fd4fbf0 cpus 5 group ffff88000fd8fbf0 cpus 6 group ffff88000fdcfbf0 cpus 7 group ffff88000fc0fbf0 cpus 0 group ffff88000fc4fbf0 cpus 1 group ffff88000fc8fbf0 cpus 2
[ 0.716092] CPU4 attaching sched-domain:
[ 0.716094] domain 0: span 0-7 level MC
[ 0.716095] groups: group ffff88000fd0fbf0 cpus 4 group ffff88000fd4fbf0 cpus 5 group ffff88000fd8fbf0 cpus 6 group ffff88000fdcfbf0 cpus 7 group ffff88000fc0fbf0 cpus 0 group ffff88000fc4fbf0 cpus 1 group ffff88000fc8fbf0 cpus 2 group ffff88000fccfbf0 cpus 3
[ 0.716103] CPU5 attaching sched-domain:
[ 0.716104] domain 0: span 0-7 level MC
[ 0.716105] groups: group ffff88000fd4fbf0 cpus 5 group ffff88000fd8fbf0 cpus 6 group ffff88000fdcfbf0 cpus 7 group ffff88000fc0fbf0 cpus 0 group ffff88000fc4fbf0 cpus 1 group ffff88000fc8fbf0 cpus 2 group ffff88000fccfbf0 cpus 3 group ffff88000fd0fbf0 cpus 4
[ 0.716113] CPU6 attaching sched-domain:
[ 0.716114] domain 0: span 0-7 level MC
[ 0.716116] groups: group ffff88000fd8fbf0 cpus 6 group ffff88000fdcfbf0 cpus 7 group ffff88000fc0fbf0 cpus 0 group ffff88000fc4fbf0 cpus 1 group ffff88000fc8fbf0 cpus 2 group ffff88000fccfbf0 cpus 3 group ffff88000fd0fbf0 cpus 4 group ffff88000fd4fbf0 cpus 5
[ 0.716124] CPU7 attaching sched-domain:
[ 0.716125] domain 0: span 0-7 level MC
[ 0.716126] groups: group ffff88000fdcfbf0 cpus 7 group ffff88000fc0fbf0 cpus 0 group ffff88000fc4fbf0 cpus 1 group ffff88000fc8fbf0 cpus 2 group ffff88000fccfbf0 cpus 3 group ffff88000fd0fbf0 cpus 4 group ffff88000fd4fbf0 cpus 5 group ffff88000fd8fbf0 cpus 6
[ 0.716227] devtmpfs: initialized
[ 0.720903] regulator: core version 0.5
[ 0.720903] NET: Registered protocol family 16
[ 0.720903] ACPI: bus type pci registered
[ 0.720903] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.720903] PCI: MCFG area at e0000000 reserved in E820
[ 0.725375] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.725376] PCI: Using configuration type 1 for base access
[ 0.725903] bio: create slab at 0
[ 0.725903] ACPI: EC: Look up EC in DSDT
[ 0.736002] ACPI: Interpreter enabled
[ 0.736002] ACPI: (supports S0 S3 S4 S5)
[ 0.736002] ACPI: Using IOAPIC for interrupt routing
[ 0.741369] ACPI Warning: Incorrect checksum in table [TAMG] - D2, should be D1 (20090903/tbutils-314)
[ 0.741458] ACPI: No dock devices found.
[ 0.741550] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.741588] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.741646] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.741649] pci 0000:00:02.0: PME# disabled
[ 0.741683] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.741685] pci 0000:00:09.0: PME# disabled
[ 0.741713] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.741715] pci 0000:00:0a.0: PME# disabled
[ 0.741752] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.741757] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.741762] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.741767] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.741772] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.741777] pci 0000:00:11.0: reg 24 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.741790] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.741825] pci 0000:00:12.0: reg 10 32bit mmio: [0xfdffe000-0xfdffefff]
[ 0.741880] pci 0000:00:12.2: reg 10 32bit mmio: [0xfdffd000-0xfdffd0ff]
[ 0.741918] pci 0000:00:12.2: supports D1 D2
[ 0.741919] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.741922] pci 0000:00:12.2: PME# disabled
[ 0.741945] pci 0000:00:13.0: reg 10 32bit mmio: [0xfdffc000-0xfdffcfff]
[ 0.742000] pci 0000:00:13.2: reg 10 32bit mmio: [0xfdffb000-0xfdffb0ff]
[ 0.742038] pci 0000:00:13.2: supports D1 D2
[ 0.742039] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.742042] pci 0000:00:13.2: PME# disabled
[ 0.742104] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.742108] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.742113] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.742118] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.742123] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.742162] pci 0000:00:14.2: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
[ 0.742193] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.742196] pci 0000:00:14.2: PME# disabled
[ 0.742274] pci 0000:00:14.5: reg 10 32bit mmio: [0xfdffa000-0xfdffafff]
[ 0.742344] pci 0000:00:15.0: supports D1 D2
[ 0.742394] pci 0000:00:15.1: supports D1 D2
[ 0.742446] pci 0000:00:15.2: supports D1 D2
[ 0.742473] pci 0000:00:16.0: reg 10 32bit mmio: [0xfdff9000-0xfdff9fff]
[ 0.742528] pci 0000:00:16.2: reg 10 32bit mmio: [0xfdff8000-0xfdff80ff]
[ 0.742566] pci 0000:00:16.2: supports D1 D2
[ 0.742567] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.742570] pci 0000:00:16.2: PME# disabled
[ 0.742687] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.742696] pci 0000:01:00.0: reg 18 64bit mmio: [0xfddc0000-0xfdddffff]
[ 0.742701] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff]
[ 0.742709] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.742727] pci 0000:01:00.0: supports D1 D2
[ 0.742762] pci 0000:01:00.1: reg 10 64bit mmio: [0xfddfc000-0xfddfffff]
[ 0.742797] pci 0000:01:00.1: supports D1 D2
[ 0.748082] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.748085] pci 0000:00:02.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.748088] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.748122] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdaf8000-0xfdafffff]
[ 0.748164] pci 0000:02:00.0: supports D1 D2
[ 0.748166] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.748169] pci 0000:02:00.0: PME# disabled
[ 0.756067] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.756070] pci 0000:00:09.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.756073] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfd300000-0xfd3fffff]
[ 0.756101] pci 0000:03:00.0: reg 10 io port: [0xcf00-0xcf07]
[ 0.756106] pci 0000:03:00.0: reg 14 io port: [0xce00-0xce03]
[ 0.756110] pci 0000:03:00.0: reg 18 io port: [0xcd00-0xcd07]
[ 0.756115] pci 0000:03:00.0: reg 1c io port: [0xcc00-0xcc03]
[ 0.756119] pci 0000:03:00.0: reg 20 io port: [0xcb00-0xcb0f]
[ 0.756124] pci 0000:03:00.0: reg 24 32bit mmio: [0xfd2ff000-0xfd2ff1ff]
[ 0.756130] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.756148] pci 0000:03:00.0: PME# supported from D3hot
[ 0.756151] pci 0000:03:00.0: PME# disabled
[ 0.764061] pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff]
[ 0.764063] pci 0000:00:0a.0: bridge 32bit mmio: [0xfd200000-0xfd2fffff]
[ 0.764066] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.764121] pci 0000:04:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff]
[ 0.764130] pci 0000:04:0e.0: reg 14 io port: [0xbf00-0xbf7f]
[ 0.764179] pci 0000:04:0e.0: supports D2
[ 0.764180] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.764184] pci 0000:04:0e.0: PME# disabled
[ 0.764218] pci 0000:00:14.4: transparent bridge
[ 0.764221] pci 0000:00:14.4: bridge io port: [0xb000-0xbfff]
[ 0.764224] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.764227] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.764269] pci 0000:05:00.0: reg 10 io port: [0xae00-0xaeff]
[ 0.764287] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xfd8ff000-0xfd8fffff]
[ 0.764300] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xfd8f8000-0xfd8fbfff]
[ 0.764341] pci 0000:05:00.0: supports D1 D2
[ 0.764342] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.764346] pci 0000:05:00.0: PME# disabled
[ 0.772081] pci 0000:00:15.0: bridge io port: [0xa000-0xafff]
[ 0.772084] pci 0000:00:15.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[ 0.772088] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
[ 0.772136] pci 0000:06:00.0: reg 10 64bit mmio: [0xfd7f8000-0xfd7fffff]
[ 0.772191] pci 0000:06:00.0: supports D1 D2
[ 0.772193] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.772196] pci 0000:06:00.0: PME# disabled
[ 0.780083] pci 0000:00:15.1: bridge io port: [0x9000-0x9fff]
[ 0.780086] pci 0000:00:15.1: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
[ 0.780090] pci 0000:00:15.1: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff]
[ 0.780128] pci 0000:07:00.0: reg 10 io port: [0x8f00-0x8f07]
[ 0.780134] pci 0000:07:00.0: reg 14 io port: [0x8e00-0x8e03]
[ 0.780140] pci 0000:07:00.0: reg 18 io port: [0x8d00-0x8d07]
[ 0.780146] pci 0000:07:00.0: reg 1c io port: [0x8c00-0x8c03]
[ 0.780152] pci 0000:07:00.0: reg 20 io port: [0x8b00-0x8b0f]
[ 0.780157] pci 0000:07:00.0: reg 24 32bit mmio: [0xfd5ff000-0xfd5ff1ff]
[ 0.780163] pci 0000:07:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.780189] pci 0000:07:00.0: PME# supported from D3hot
[ 0.780193] pci 0000:07:00.0: PME# disabled
[ 0.788071] pci 0000:00:15.2: bridge io port: [0x8000-0x8fff]
[ 0.788074] pci 0000:00:15.2: bridge 32bit mmio: [0xfd500000-0xfd5fffff]
[ 0.788083] pci 0000:00:15.2: bridge 64bit mmio pref: [0xfd400000-0xfd4fffff]
[ 0.788105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.788351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.788393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.788435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.788482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.788536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.788587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.788628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.804287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804367] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804522] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804599] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804751] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804827] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 0.804904] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.804908] vgaarb: loaded
[ 0.804921] PCI: Using ACPI for IRQ routing
[ 0.804921] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.804921] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.804921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.804921] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.806472] Switching to clocksource tsc
[ 0.806479] pnp: PnP ACPI init
[ 0.806479] ACPI: bus type pnp registered
[ 0.806479] pnp 00:0a: mem resource (0xf0000-0xf3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.806479] pnp 00:0a: mem resource (0xf4000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.806479] pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.806479] pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.806479] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.806479] pnp 00:0a: mem resource (0x100000-0xcfd9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.806479] pnp: PnP ACPI: found 11 devices
[ 0.806479] ACPI: ACPI bus type pnp unregistered
[ 0.806479] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.806479] system 00:01: ioport range 0x220-0x225 has been reserved
[ 0.806479] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.806479] system 00:02: ioport range 0x900-0x91f has been reserved
[ 0.806479] system 00:02: ioport range 0x228-0x22f has been reserved
[ 0.806479] system 00:02: ioport range 0x40b-0x40b has been reserved
[ 0.806479] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.806479] system 00:02: ioport range 0xc00-0xc01 has been reserved
[ 0.806479] system 00:02: ioport range 0xc14-0xc14 has been reserved
[ 0.806479] system 00:02: ioport range 0xc50-0xc52 has been reserved
[ 0.806479] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 0.806479] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[ 0.806479] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[ 0.806479] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[ 0.806479] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[ 0.806479] system 00:02: ioport range 0x800-0x8fe has been reserved
[ 0.806479] system 00:02: ioport range 0xa10-0xa17 has been reserved
[ 0.806479] system 00:02: ioport range 0xb00-0xb0f has been reserved
[ 0.806479] system 00:02: ioport range 0xb10-0xb1f has been reserved
[ 0.806479] system 00:02: ioport range 0xb20-0xb3f has been reserved
[ 0.806479] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.806479] system 00:0a: iomem range 0xcfda0000-0xcfdfffff could not be reserved
[ 0.806479] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.806479] system 00:0a: iomem range 0xcfe00000-0xcfefffff has been reserved
[ 0.806479] system 00:0a: iomem range 0xcff00000-0xcfffffff could not be reserved
[ 0.806479] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.806479] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.806479] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.811255] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.811257] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.811260] pci 0000:00:02.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.811262] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.811265] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.811267] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.811269] pci 0000:00:09.0: MEM window: 0xfda00000-0xfdafffff
[ 0.811271] pci 0000:00:09.0: PREFETCH window: 0x000000fd300000-0x000000fd3fffff
[ 0.811274] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03
[ 0.811276] pci 0000:00:0a.0: IO window: 0xc000-0xcfff
[ 0.811278] pci 0000:00:0a.0: MEM window: 0xfd200000-0xfd2fffff
[ 0.811281] pci 0000:00:0a.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.811284] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
[ 0.811286] pci 0000:00:14.4: IO window: 0xb000-0xbfff
[ 0.811289] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff
[ 0.811292] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff
[ 0.811297] pci 0000:00:15.0: PCI bridge, secondary bus 0000:05
[ 0.811299] pci 0000:00:15.0: IO window: 0xa000-0xafff
[ 0.811302] pci 0000:00:15.0: MEM window: 0xfd900000-0xfd9fffff
[ 0.811305] pci 0000:00:15.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
[ 0.811309] pci 0000:00:15.1: PCI bridge, secondary bus 0000:06
[ 0.811311] pci 0000:00:15.1: IO window: 0x9000-0x9fff
[ 0.811314] pci 0000:00:15.1: MEM window: 0xfd700000-0xfd7fffff
[ 0.811317] pci 0000:00:15.1: PREFETCH window: 0x000000fd600000-0x000000fd6fffff
[ 0.811321] pci 0000:00:15.2: PCI bridge, secondary bus 0000:07
[ 0.811323] pci 0000:00:15.2: IO window: 0x8000-0x8fff
[ 0.811326] pci 0000:00:15.2: MEM window: 0xfd500000-0xfd5fffff
[ 0.811329] pci 0000:00:15.2: PREFETCH window: 0x000000fd400000-0x000000fd4fffff
[ 0.811336] alloc irq_desc for 18 on node -1
[ 0.811338] alloc kstat_irqs on node -1
[ 0.811342] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.811345] pci 0000:00:02.0: setting latency timer to 64
[ 0.811349] alloc irq_desc for 17 on node -1
[ 0.811350] alloc kstat_irqs on node -1
[ 0.811352] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.811354] pci 0000:00:09.0: setting latency timer to 64
[ 0.811358] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.811360] pci 0000:00:0a.0: setting latency timer to 64
[ 0.811368] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.811371] pci 0000:00:15.0: setting latency timer to 64
[ 0.811376] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.811379] pci 0000:00:15.1: setting latency timer to 64
[ 0.811384] pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.811387] pci 0000:00:15.2: setting latency timer to 64
[ 0.811389] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.811391] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.811393] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.811394] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.811396] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.811397] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.811399] pci_bus 0000:02: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.811401] pci_bus 0000:02: resource 2 pref mem [0xfd300000-0xfd3fffff]
[ 0.811402] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.811404] pci_bus 0000:03: resource 1 mem: [0xfd200000-0xfd2fffff]
[ 0.811405] pci_bus 0000:03: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.811407] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.811409] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.811410] pci_bus 0000:04: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.811412] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.811414] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.811416] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
[ 0.811417] pci_bus 0000:05: resource 1 mem: [0xfd900000-0xfd9fffff]
[ 0.811419] pci_bus 0000:05: resource 2 pref mem [0xfd800000-0xfd8fffff]
[ 0.811421] pci_bus 0000:06: resource 0 io: [0x9000-0x9fff]
[ 0.811422] pci_bus 0000:06: resource 1 mem: [0xfd700000-0xfd7fffff]
[ 0.811424] pci_bus 0000:06: resource 2 pref mem [0xfd600000-0xfd6fffff]
[ 0.811426] pci_bus 0000:07: resource 0 io: [0x8000-0x8fff]
[ 0.811427] pci_bus 0000:07: resource 1 mem: [0xfd500000-0xfd5fffff]
[ 0.811429] pci_bus 0000:07: resource 2 pref mem [0xfd400000-0xfd4fffff]
[ 0.811450] NET: Registered protocol family 2
[ 0.811743] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.812751] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.814357] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.814566] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.814567] TCP reno registered
[ 0.814638] NET: Registered protocol family 1
[ 0.880842] pci 0000:01:00.0: Boot video device
[ 0.880926] Unpacking initramfs...
[ 1.023842] Freeing initrd memory: 9039k freed
[ 1.025726] audit: initializing netlink socket (disabled)
[ 1.025735] type=2000 audit(1327497681.024:1): initialized
[ 1.028123] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.029107] VFS: Disk quotas dquot_6.5.2
[ 1.029142] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.029193] msgmni has been set to 32133
[ 1.029417] alg: No test for stdrng (krng)
[ 1.029450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.029452] io scheduler noop registered
[ 1.029453] io scheduler anticipatory registered
[ 1.029454] io scheduler deadline registered
[ 1.029478] io scheduler cfq registered (default)
[ 1.029566] alloc irq_desc for 24 on node -1
[ 1.029567] alloc kstat_irqs on node -1
[ 1.029574] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 1.029578] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.029627] alloc irq_desc for 25 on node -1
[ 1.029628] alloc kstat_irqs on node -1
[ 1.029632] pcieport 0000:00:09.0: irq 25 for MSI/MSI-X
[ 1.029635] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.029682] alloc irq_desc for 26 on node -1
[ 1.029683] alloc kstat_irqs on node -1
[ 1.029687] pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
[ 1.029690] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.029758] alloc irq_desc for 27 on node -1
[ 1.029759] alloc kstat_irqs on node -1
[ 1.029765] pcieport 0000:00:15.0: irq 27 for MSI/MSI-X
[ 1.029770] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.029856] alloc irq_desc for 28 on node -1
[ 1.029857] alloc kstat_irqs on node -1
[ 1.029863] pcieport 0000:00:15.1: irq 28 for MSI/MSI-X
[ 1.029868] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.029953] alloc irq_desc for 29 on node -1
[ 1.029954] alloc kstat_irqs on node -1
[ 1.029959] pcieport 0000:00:15.2: irq 29 for MSI/MSI-X
[ 1.029965] pcieport 0000:00:15.2: setting latency timer to 64
[ 1.030901] Linux agpgart interface v0.103
[ 1.031156] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.031188] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.031189] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.031299] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.031323] mice: PS/2 mouse device common for all mice
[ 1.031323] rtc_cmos 00:05: RTC can wake from S4
[ 1.031323] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.031323] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.031323] cpuidle: using governor ladder
[ 1.031323] cpuidle: using governor menu
[ 1.031323] No iBFT detected.
[ 1.031474] TCP cubic registered
[ 1.031554] NET: Registered protocol family 10
[ 1.032066] Mobile IPv6
[ 1.032068] NET: Registered protocol family 17
[ 1.032087] PM: Resume from disk failed.
[ 1.032087] registered taskstats version 1
[ 1.032458] rtc_cmos 00:05: setting system clock to 2012-01-25 13:21:22 UTC (1327497682)
[ 1.032488] Initalizing network drop monitor service
[ 1.032514] Freeing unused kernel memory: 592k freed
[ 1.032639] Write protecting the kernel read-only data: 4220k
[ 1.043008] udev[116]: starting version 164
[ 1.050929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.069634] SCSI subsystem initialized
[ 1.071620] usbcore: registered new interface driver usbfs
[ 1.071620] usbcore: registered new interface driver hub
[ 1.071642] usbcore: registered new device driver usb
[ 1.080815] libata version 3.00 loaded.
[ 1.083081] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.083103] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.083160] r8169 0000:05:00.0: setting latency timer to 64
[ 1.083167] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
[ 1.083239] alloc irq_desc for 30 on node -1
[ 1.083241] alloc kstat_irqs on node -1
[ 1.083255] r8169 0000:05:00.0: irq 30 for MSI/MSI-X
[ 1.083807] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc900126f0000, 1c:6f:65:cc:e3:66, XID 0c900800 IRQ 30
[ 1.084303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084328] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.084356] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.084378] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.084391] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.084411] ehci_hcd 0000:00:12.2: debug port 1
[ 1.084428] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
[ 1.084742] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.084767] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.084770] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.084777] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.084842] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdaf8000
[ 1.084865] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 1.084871] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.084874] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084876] usb usb2: Product: xHCI Host Controller
[ 1.084877] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 1.084879] usb usb2: SerialNumber: 0000:02:00.0
[ 1.084936] usb usb2: configuration #1 chosen from 1 choice
[ 1.084939] xHCI xhci_add_endpoint called for root hub
[ 1.084941] xHCI xhci_check_bandwidth called for root hub
[ 1.084965] hub 2-0:1.0: USB hub found
[ 1.084970] hub 2-0:1.0: 4 ports detected
[ 1.085027] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.085048] xhci_hcd 0000:06:00.0: setting latency timer to 64
[ 1.085051] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.085058] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
[ 1.085142] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfd7f8000
[ 1.085170] usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 1.085178] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.085180] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.085182] usb usb3: Product: xHCI Host Controller
[ 1.085184] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 1.085186] usb usb3: SerialNumber: 0000:06:00.0
[ 1.085237] usb usb3: configuration #1 chosen from 1 choice
[ 1.085239] xHCI xhci_add_endpoint called for root hub
[ 1.085241] xHCI xhci_check_bandwidth called for root hub
[ 1.085265] hub 3-0:1.0: USB hub found
[ 1.085270] hub 3-0:1.0: 4 ports detected
[ 1.091240] alloc irq_desc for 22 on node -1
[ 1.091241] alloc kstat_irqs on node -1
[ 1.091246] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.096769] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.096789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.096791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.096793] usb usb1: Product: EHCI Host Controller
[ 1.096794] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.096795] usb usb1: SerialNumber: 0000:00:12.2
[ 1.096847] usb usb1: configuration #1 chosen from 1 choice
[ 1.096866] hub 1-0:1.0: USB hub found
[ 1.096871] hub 1-0:1.0: 5 ports detected
[ 1.096904] ahci 0000:00:11.0: version 3.0
[ 1.096909] alloc irq_desc for 19 on node -1
[ 1.096911] alloc kstat_irqs on node -1
[ 1.096916] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.097006] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.097008] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.097168] scsi0 : ahci
[ 1.097228] scsi1 : ahci
[ 1.097271] scsi2 : ahci
[ 1.097314] scsi3 : ahci
[ 1.097402] ata1: SATA max UDMA/133 irq 19, PHY RDY changed
[ 1.097404] ata2: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
[ 1.097407] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[ 1.097409] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[ 1.097448] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.097521] scsi4 : pata_atiixp
[ 1.097580] scsi5 : pata_atiixp
[ 1.098428] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.098430] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.098453] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.098453] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.098453] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.098453] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.098453] ehci_hcd 0000:00:13.2: debug port 1
[ 1.098463] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
[ 1.108774] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.108787] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.108788] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.108790] usb usb4: Product: EHCI Host Controller
[ 1.108791] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.108792] usb usb4: SerialNumber: 0000:00:13.2
[ 1.108843] usb usb4: configuration #1 chosen from 1 choice
[ 1.108861] hub 4-0:1.0: USB hub found
[ 1.108866] hub 4-0:1.0: 5 ports detected
[ 1.108908] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.108919] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.108924] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 1.108933] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.108948] ehci_hcd 0000:00:16.2: debug port 1
[ 1.108957] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
[ 1.120764] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.120776] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.120777] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.120779] usb usb5: Product: EHCI Host Controller
[ 1.120780] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.120781] usb usb5: SerialNumber: 0000:00:16.2
[ 1.120828] usb usb5: configuration #1 chosen from 1 choice
[ 1.120846] hub 5-0:1.0: USB hub found
[ 1.120850] hub 5-0:1.0: 4 ports detected
[ 1.168040] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI version 1.10
[ 1.172712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.172725] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.172746] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.172754] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 1.172778] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
[ 1.232267] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.232269] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232270] usb usb6: Product: OHCI Host Controller
[ 1.232272] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.232273] usb usb6: SerialNumber: 0000:00:12.0
[ 1.232321] usb usb6: configuration #1 chosen from 1 choice
[ 1.232341] hub 6-0:1.0: USB hub found
[ 1.232348] hub 6-0:1.0: 5 ports detected
[ 1.232388] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.232400] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.232405] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.232418] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
[ 1.260510] ata5.00: ATAPI: ASUS BW-12B1ST, 1.03, max UDMA/100
[ 1.260525] ata5.00: limited to UDMA/33 due to 40-wire cable
[ 1.276292] ata5.00: configured for UDMA/33
[ 1.292265] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.292267] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.292269] usb usb7: Product: OHCI Host Controller
[ 1.292270] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.292271] usb usb7: SerialNumber: 0000:00:13.0
[ 1.292317] usb usb7: configuration #1 chosen from 1 choice
[ 1.292335] hub 7-0:1.0: USB hub found
[ 1.292342] hub 7-0:1.0: 5 ports detected
[ 1.292383] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.292394] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.292399] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.292411] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
[ 1.348267] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.348269] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.348270] usb usb8: Product: OHCI Host Controller
[ 1.348271] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.348273] usb usb8: SerialNumber: 0000:00:14.5
[ 1.348317] usb usb8: configuration #1 chosen from 1 choice
[ 1.348335] hub 8-0:1.0: USB hub found
[ 1.348342] hub 8-0:1.0: 2 ports detected
[ 1.348377] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.348388] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.348393] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.348406] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
[ 1.404267] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.404269] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404270] usb usb9: Product: OHCI Host Controller
[ 1.404272] usb usb9: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.404273] usb usb9: SerialNumber: 0000:00:16.0
[ 1.404317] usb usb9: configuration #1 chosen from 1 choice
[ 1.404337] hub 9-0:1.0: USB hub found
[ 1.404343] hub 9-0:1.0: 4 ports detected
[ 1.424061] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.572033] usb 6-3: new low speed USB device using ohci_hcd and address 2
[ 1.584049] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.590423] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01109, max UDMA7
[ 1.590425] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.596930] ata4.00: configured for UDMA/133
[ 1.668087] firewire_core: created device fw0: GUID 00656f1c47b6ca00, S400
[ 1.740102] usb 6-3: New USB device found, idVendor=045e, idProduct=00f6
[ 1.740104] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.740106] usb 6-3: Product: Comfort Optical Mouse 1000
[ 1.740108] usb 6-3: Manufacturer: Microsoft
[ 1.740154] usb 6-3: configuration #1 chosen from 1 choice
[ 1.984043] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.984046] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.995748] ata2.00: ATA-8: Corsair Force GT, 1.3.3, max UDMA/133
[ 1.995750] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.996046] ata1.00: ATA-8: Corsair Force GT, 1.3.3, max UDMA/133
[ 1.996049] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.005660] ata2.00: configured for UDMA/133
[ 2.005973] ata1.00: configured for UDMA/133
[ 2.020144] scsi 0:0:0:0: Direct-Access ATA Corsair Force GT 1.3. PQ: 0 ANSI: 5
[ 2.020296] scsi 1:0:0:0: Direct-Access ATA Corsair Force GT 1.3. PQ: 0 ANSI: 5
[ 2.020447] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 2.022748] scsi 4:0:0:0: CD-ROM ASUS BW-12B1ST 1.03 PQ: 0 ANSI: 5
[ 2.189206] usbcore: registered new interface driver hiddev
[ 2.192680] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.192717] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.192709] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.192756] sd 0:0:0:0: [sda] Write Protect is off
[ 2.192756] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.192756] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.192756] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.192756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.192756] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.192756] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.192756] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.192846] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.192956] sda:
[ 2.192999] sdc:
[ 2.193054] sdb:
[ 2.193252] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.0/input/input2
[ 2.193252] generic-usb 0003:045E:00F6.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:12.0-3/input0
[ 2.193252] usbcore: registered new interface driver usbhid
[ 2.193252] usbhid: v2.6:USB HID core driver
[ 2.194241] sda1 sda2 < sda5 >
[ 2.194382] sdb1
[ 2.194618] sdc1
[ 2.194641] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.194694] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.194826] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.203679] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.203681] Uniform CD-ROM driver Revision: 3.20
[ 2.203759] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.206228] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.206254] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.206274] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.206299] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 2.399928] PM: Starting manual resume from disk
[ 2.399931] PM: Resume from partition 8:5
[ 2.399932] PM: Checking hibernation image.
[ 2.400029] PM: Error -22 checking image file
[ 2.400031] PM: Resume from disk failed.
[ 2.408410] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 2.408412] EXT3-fs: write access will be enabled during recovery.
[ 2.449986] kjournald starting. Commit interval 5 seconds
[ 2.449998] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 2.450003] ext3_orphan_cleanup: deleting unreferenced inode 6946860
[ 2.450025] ext3_orphan_cleanup: deleting unreferenced inode 6946859
[ 2.450031] EXT3-fs: sda1: 2 orphan inodes deleted
[ 2.450033] EXT3-fs: recovery complete.
[ 2.450480] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.537891] udev[436]: starting version 164
[ 2.565752] processor LNXCPU:00: registered as cooling_device0
[ 2.565752] processor LNXCPU:01: registered as cooling_device1
[ 2.565752] processor LNXCPU:02: registered as cooling_device2
[ 2.565752] processor LNXCPU:03: registered as cooling_device3
[ 2.565844] processor LNXCPU:04: registered as cooling_device4
[ 2.565895] processor LNXCPU:05: registered as cooling_device5
[ 2.566086] processor LNXCPU:06: registered as cooling_device6
[ 2.566086] processor LNXCPU:07: registered as cooling_device7
[ 2.566536] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.566542] ACPI: Power Button [PWRB]
[ 2.566607] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.566610] ACPI: Power Button [PWRF]
[ 2.568415] ACPI: WMI: Mapper loaded
[ 2.588501] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.589752] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 2.589762] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.620044] alloc irq_desc for 16 on node -1
[ 2.620047] alloc kstat_irqs on node -1
[ 2.620054] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.699553] hda_codec: ALC889: BIOS auto-probing.
[ 2.701040] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 2.704403] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.704434] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 2.909755] Adding 4789240k swap on /dev/sda5. Priority:-1 extents:1 across:4789240k SS
[ 2.927175] EXT3 FS on sda1, internal journal
[ 2.940118] loop: module loaded
[ 3.245327] fuse init (API version 7.13)
[ 3.280458] RPC: Registered udp transport module.
[ 3.280460] RPC: Registered tcp transport module.
[ 3.280462] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.295993] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 3.307129] svc: failed to register lockdv1 RPC service (errno 97).
[ 3.308003] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 3.308423] NFSD: starting 90-second grace period
[ 3.924486] Bluetooth: Core ver 2.15
[ 3.924499] NET: Registered protocol family 31
[ 3.924499] Bluetooth: HCI device and connection manager initialized
[ 3.924499] Bluetooth: HCI socket layer initialized
[ 3.984060] vboxdrv: Found 8 processor cores.
[ 3.984113] VBoxDrv: dbg - g_abExecMemory=ffffffffa0360800
[ 3.984243] vboxdrv: fAsync=0 offMin=0x40a offMax=0x13a83
[ 3.984285] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 3.984287] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000).
[ 4.044266] Bluetooth: L2CAP ver 2.14
[ 4.044269] Bluetooth: L2CAP socket layer initialized
[ 4.046951] Bluetooth: RFCOMM TTY layer initialized
[ 4.046951] Bluetooth: RFCOMM socket layer initialized
[ 4.046951] Bluetooth: RFCOMM ver 1.11
[ 4.051947] lp: driver loaded but no devices found
[ 4.055029] ppdev: user-space parallel port driver
[ 4.063732] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.063734] Bluetooth: BNEP filters: protocol multicast
[ 4.077818] Bridge firewalling registered
[ 4.104033] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.104035] Bluetooth: SCO socket layer initialized
[ 4.114374] r8169 0000:05:00.0: eth0: link down
[ 4.114312] r8169 0000:05:00.0: eth0: link down
[ 4.115877] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.250811] vboxpci: IOMMU not found (not compiled)
[ 7.884323] r8169 0000:05:00.0: eth0: link up
[ 7.886239] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.052005] eth0: no IPv6 routers present
[22462.439548] UDF-fs: No VRS found
[22462.439553] UDF-fs: No partition found (1)
[22462.512258] ISO 9660 Extensions: Microsoft Joliet Level 3
[22462.554727] ISO 9660 Extensions: RRIP_1991A
[29172.659117] ISO 9660 Extensions: Microsoft Joliet Level 3
[29172.701130] ISO 9660 Extensions: RRIP_1991A